Wen 6501 Service Manual download pdf (Page 7)

Electrical information

Grounding instructions

IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of

least resistance for electric current and reduces the risk of electric shock. This tool is equipped with

an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST

be plugged into a matching outlet that is properly installed and grounded in accordance with ALL

local codes and ordinances.

DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet

installed by an electrician.

IMPROPER CONNECTION of the equipment grounding conductor can result in electric shock.

The conductor with the green insulation (with or without yellow stripes) is the equipment

grounding conductor. If repair or replacement of the electric cord or plug is necessary, DO NOT

connect the equipment grounding conductor to a live terminal.

CHECK with a licensed electrician or service personnel if you do not completely understand the

grounding instructions, or if you are not sure if the tool is properly grounded.

USE ONLY THREE-WIRE EXTENSION CORDS that have 3-pronged plugs and outlets that

accept the tool's plug as shown in Fig. A. Repair or replace a damaged or worn cord immediately.

CAUTION: In all cases, make certain the outlet in question is properly grounded. If you are not

sure if it is, have a licensed electrician check the outlet.

Model: 6501 wenproducts.com

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

No comments

Wen 6501 Service Manual Page 7