Wen 4016 16 Electric Chainsaw User Manual

IMPORTANT:Read this instruction manual carefully before putting the chainsaw into operation and strictly observe the safety regulations! Keep t

10CUTTING INSTRUCTIONSWARNING - Always follow safety procedures. Use the chain-saw only for cutting wood and not other types of materials. Do not use

11LIMBING – THE REMOvAL OF BRANCHES FROM A FELLED TREE. (FIG.16)Do not use the nose of the guide bar. Be careful and cautious and avoid contacting the

12GUIDE BAR AND OIL HOLESClean guide bar before use. Follow instructions for removing and installing guide bar and saw chain. Remove guide bar and cle

13Please note that the following maintenance intervals apply for normal operating conditions only. If you daily working time is longer than normal or

14EXPLODED VIEW & PARTS LIST

15EXPLODED VIEW & PARTS LISTITEM# DESCRIPTION QTY1 SCREW ST4.2X16 182 LABEL 13 RIGHT HANDLE 14 O-RING 15 OIL CAP 16 POWER CORD 17 CORD SLEEVE 18 C

16WEN Products warrants its power tools to be free of defects in materials and from work-manship for a period of one (1) year from date of original pu

17NOTES

2TABLE OF CONTENTSThe WEN product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, guide bar and saw

3CHAINSAW SPECIFICATIONSBAR AND CHAINChainsaw Size 16"Oregon Bar/Chain Combo 509535Oregon Chain S54SPECIFICATIONSModel 4016Motor 120V, 60Hz, 13

4READ ALL INSTRUCTIONS. Make sure you read and understand all instructions Important Safety Information on pages 2 through 4. Improper use of this cha

510. Before cutting, always provide the following: Clear work area Secure footing Planned retreat path from falling tree11. Inspect tree before cut

616. Carry chain saw from one place to another • With saw stopped and unplugged • By holding front handle (never use hand guard as handle) • With 

7CHAINSAW COMPONENTSEXTENSION CORDSIf you use an extension cord, be sure to use one heavy enough to carry the current your electric saw will draw. An

8ASSEMBLYINSTALLING THE GUIDE BAR AND SAW CHAIN1. Loosen the locking knob counter clockwise and remove the sprocket cover2. The adjust block should

9WARNING - Never use waste or reclaimed oil. This results in damage to the oil pump, saw chain and guide bar.WARNING - Always loosen locking knob befo